Nikolay603
New Member
Вид товара: Усилители и ресиверы
Усилитель Luxman L-507, винтаж.
Цена 35000 руб. Спешите! Цена снижена на 5000 рублей до 10-го ноября!
Один из лучших винтажных транзисторных усилителей.
Состояние идеальное, питание 220 вольт.
В прекрасном деревянном кабинете с небольшими следами бытования.
Технические данные:
Rating of a mode
Form Stereo integrated amplifier
Succession effective output 50W+50W (8 ohms, both channel simultaneous operation)
60W/60W (ohms [ 8 ], one-side-channel operation)
THD 0.03% or less (8ohm, 50W)
Cross modulation distortion 0.04% or less (8ohm, 50W, 70Hz:7kHz=4:1)
Output bandwidth 5Hz - -50kHz three dB (0.1%)
Input sensitivity/impedance 580mV/50kohm
Remains noise 0.5mV or less
Dumping factor 40 (8 ohms, 20Hz - 20kHz)
Attachment Attenuator (-18dB)
Main speaker switchpoint
Remote speaker switchpoint
Headset jack
Standard output voltage Pre out:580mV
Rec out:100mV
Maximum output voltage Pre out:5V
Output load impedance Pre out: About 100ohms
Rec out: About 100ohms
Frequency characteristic 10Hz - -50kHz one dB (Aux1)
THD 0.04% or less (Aux1, 1kHz, 1V)
Input sensitivity Phono1, 2:2.4 mV
Tuner: 100mV (with an input level set)
Aux1, 2:100mV
Mic:2.4mV
Input impedance Phono1:50kohm, 65kohm, 90kohm, a switching
Phono2:65kohm
Tuner: 50kohm
Aux1, 2:50kohm
Mic: 50kohm
SN ratio Phono1, 2:65dB or more
Mic: 60dB or more
Tuner, Aux1, 2:80dB or more
Maximum permissible input Phono: 300mV (1kHz, R-M-S)
Tone control With a curving [ LUX scheme NF type ] point switching
The point curving [ low-pass ]: 150Hz, 300Hz, 600Hz
The point curving [ high region ]: 1.5kHz, 3kHz, 6kHz
Filter A low cut: 30Hz, 6dB / oct
A high cut: 8kHz, 6dB / oct
A low boost 70Hz
Attachment Tapes monitor switchpoint (two lines)
Dumping switchpoint
Input-impedance switching
Input level set
Dimensions Width 450x height 160x depth of 268mm
Weight 11kg
Усилитель Luxman L-507, винтаж.
Цена 35000 руб. Спешите! Цена снижена на 5000 рублей до 10-го ноября!
Один из лучших винтажных транзисторных усилителей.
Состояние идеальное, питание 220 вольт.
В прекрасном деревянном кабинете с небольшими следами бытования.
Технические данные:
Rating of a mode
Form Stereo integrated amplifier
Succession effective output 50W+50W (8 ohms, both channel simultaneous operation)
60W/60W (ohms [ 8 ], one-side-channel operation)
THD 0.03% or less (8ohm, 50W)
Cross modulation distortion 0.04% or less (8ohm, 50W, 70Hz:7kHz=4:1)
Output bandwidth 5Hz - -50kHz three dB (0.1%)
Input sensitivity/impedance 580mV/50kohm
Remains noise 0.5mV or less
Dumping factor 40 (8 ohms, 20Hz - 20kHz)
Attachment Attenuator (-18dB)
Main speaker switchpoint
Remote speaker switchpoint
Headset jack
Standard output voltage Pre out:580mV
Rec out:100mV
Maximum output voltage Pre out:5V
Output load impedance Pre out: About 100ohms
Rec out: About 100ohms
Frequency characteristic 10Hz - -50kHz one dB (Aux1)
THD 0.04% or less (Aux1, 1kHz, 1V)
Input sensitivity Phono1, 2:2.4 mV
Tuner: 100mV (with an input level set)
Aux1, 2:100mV
Mic:2.4mV
Input impedance Phono1:50kohm, 65kohm, 90kohm, a switching
Phono2:65kohm
Tuner: 50kohm
Aux1, 2:50kohm
Mic: 50kohm
SN ratio Phono1, 2:65dB or more
Mic: 60dB or more
Tuner, Aux1, 2:80dB or more
Maximum permissible input Phono: 300mV (1kHz, R-M-S)
Tone control With a curving [ LUX scheme NF type ] point switching
The point curving [ low-pass ]: 150Hz, 300Hz, 600Hz
The point curving [ high region ]: 1.5kHz, 3kHz, 6kHz
Filter A low cut: 30Hz, 6dB / oct
A high cut: 8kHz, 6dB / oct
A low boost 70Hz
Attachment Tapes monitor switchpoint (two lines)
Dumping switchpoint
Input-impedance switching
Input level set
Dimensions Width 450x height 160x depth of 268mm
Weight 11kg
Вложения
Последнее редактирование:
